Currency
|
NOTICE Our store is live with limited functionality. Account and online ordering are currently disabled. Use the form or contact us to place an order.
Original WorkBee Power Supply & Emergency Stop
£149.95
£124.96
Original WorkBee Power Supply & Emergency Stop as included in the WorkBee Z1+ CNC Machine. The WorkBee uses the mighty Meanwell HLG Series Power supply. It is a IP65 rated fully sealed unit, meaning it is totally dust tight with a vacuum seal – there is no way dust is getting into this beast!
SKU
OZN-POWER
Original WorkBee Power Supply & Emergency Stop as included in the WorkBee Z1+ CNC Machine. The WorkBee uses the mighty Meanwell HLG Series Power supply. It is a IP65 rated fully sealed unit, meaning it is totally dust tight with a vacuum seal – there is no way dust is getting into this beast!
The Power supply’s input range is compatible with all the standard voltage and frequencies used around the world and will automatically adjust accordingly. The input plug can be chosen as either UK, EU or US, no adaptors needed!
EMERGENCY STOP
As part of the package an Emergency Stop Push Button is included for added safety. It is important to be able to isolate the power and stop the machine immediately should something occur when in operation. This is even more important when using a CNC Machine!
Pre-assembled to the power supply, the emergency stop is fully tested so it is ready to just wire straight into the controller. Hardware is provided to screw both the power supply and emergency stop to your workbench.
WHAT YOU WILL BE GETTING
Specification
| Input Voltage | Input Current | Frequency | Input Power | Output Voltage | Output Current | Output Power |
| 100-240V | 3.85/1.6A | 60/50Hz | 385W | 24V | 13.34A | 320W |
Write Your Own Review