Currency
|
NOTICE Our store is live with limited functionality. Account and online ordering are currently disabled. Use the form or contact us to place an order.
1/4 inch Precision Grade Collet (compatible with DeWalt 26200)
£28.50
£23.75
A high precision tool holder for your Dewalt router
Note: This collet is not compatible with the standard DeWalt collet nut, it requires a Precision Collet Nut.
SKU
IN-30635-02
This precision grade collet is great for making the most accurate cuts. The low runout potentially improves cut quality, tool life, and noise. Perfect for small-diameter solid carbide tools which can easily break due to excessive runout.
When using the collet, make sure it snaps into the collet nut before securing it to the spindle. If not done properly, this can cause the collet to get stuck in the router as the extractor ring can’t function. More information regarding installation can be found in the Instructions file under the Files & Attachments section.
Note: This collet is not compatible with the standard DeWalt collet nut, it requires a Precision Collet Nut.
Technical Data
|
Material |
Steel |
|
Total Indicated Runout (TIR) |
<0.0004 in |
|
Hardness (HRC) |
45-52 |
|
Surface Roughness (Ra) |
0.5 μm |
|
Compatible Routers |
DeWalt 611, 26200
|
Write Your Own Review