Flexible Qwiic to STEMMA Cable - 500mm

With the SparkFun Qwiic Connect System expanding every day, we want to make sure it becomes as accessible as possible but we understand there are other systems that can compliment it out there. The Qwiic to STEMMA Adapter Cable allows interoperability between the SparkFun Qwiic Connect System and the I²C based STEMMA boards from Adafruit. Now you can plug Adafruit boards you may have onto the Qwiic bus or you can use this cable to introduce Qwiic sensors, inputs, and outputs into your Grove system.

This is a 500mm long 4-conductor cable with a Qwiic termination on one end and a STEMMA termination on the other.

STEMMA specifies 3.3V to 5V, whereas Qwiic is 3.3V only, so you will need to double check that the devices on both ends of the cable support the same voltages.

The SparkFun Qwiic connect system is an ecosystem of I²C sensors, actuators, shields and cables that make prototyping faster and less prone to error. All Qwiic-enabled boards use a common 1mm pitch, 4-pin JST connector. This reduces the amount of required PCB space, and polarized connections mean you can’t hook it up wrong.

Features:

• Length: 500mm