×

:

Not a valid Time
This is a required field.
Voltage Regulator - BD10KA5W (500mA)

Voltage Regulator - BD10KA5W (500mA)

Resistor Network - 330 Ohm (6-pin bussed)

Resistor Network - 330 Ohm (6-pin bussed)

Mega Pro Mini Cable - 8" (8-wire)

£0.80 £0.67
This is a wire assembly terminated with the same 8-pin JST-SH connector which is on the Mega Pro Mini. Pick up a few of these to break out all of those pesky pins. Integrating these connectors into your projects makes it possible to quickly swap out a Mega Pro Mini between two or more different enclosures. One end is terminated with a JST-SH connector and the other end is tinned bare wire leads.
SKU
S-PRT-10853

This is a wire assembly terminated with the same 8-pin JST-SH connector which is on the Mega Pro Mini. Pick up a few of these to break out all of those pesky pins. Integrating these connectors into your projects makes it possible to quickly swap out a Mega Pro Mini between two or more different enclosures. One end is terminated with a JST-SH connector and the other end is tinned bare wire leads.

Note: It takes 10 of these cables to break out every pin on the Mega Pro Mini, so make sure that you order enough for your application.

Note: The color of these wires may change from batch to batch so be sure to check your pinouts!

Features:

  • 8" length

Documents:

Write Your Own Review
You're reviewing:Mega Pro Mini Cable - 8" (8-wire)