※ LB-041(New Li-ion battery) cannot be recharged with LBB-040(Old Li-ion battery charger).
※ LBB-041(New Li-ion battery charger) can be recharged with LB-040(Old Li-ion battery).
- Do not drop or give impact. Do not operate while charging. Do not apply heat, water or any other liquid on the battery.Do not place in the microwave, washing machine or dryer. Do not use damaged batteries (inflated, deformed, damaged, etc.). Do not short circuit the polarity. Do not take the battery apart. When charging, make sure the battery is connected into the correct polarity. Do not charge when the battery is hot. Please charge after it has cooled off. Do not keep the battery connected to the controller when not in use.
Detach the battery from the robot or controller when storing away. When storing away the battery for a long time, make sure the battery life is around 50%. Do not store it in wet or hot places.
■ Components
Component |
Quantity |
|
Battery |
Li-ion Battery 3.7V 1300mAh LB-041 |
1 |
* Battery charger (LBB-041) sold separately
■ Compatible Products
- Controller : CM-150, OpenCM9.04
- Battery Charger : Li-ion Battery Charger Set LBB-040, Li-ion Battery Charger Set LBB-041
- This battery can NOT be connected directly to the controller. You will need the Li-ion Battery Charger Set (LBB-041) to connect to the controller (robot).
■ H/W Specifications
Weight |
50g |
Size |
24mm x 70mm x 27mm |
Voltage |
3.7V |
Capacity |
1300mAh |
Etc. |
Cell type Li-ion 18650 PCM built-in (overcharge, discharge, excessive current protection)00 |
Type | Li-ion |
---|---|
Voltage | 3.7V |
Capacity | 1300mAh |
Dimensions | 24mm x 70mm x 27mm |
Weight | 50g |