SparkFun Raspberry Pi 4 Hardware Starter Kit - 4GB

The Raspberry Pi 4 Hardware Starter Kit provides a solid set of parts and instruction for working with the Raspberry Pi 4 in a more hardware-centric manner. While the Raspberry Pi isn't typically considered a go-to for hardware projects, its I/O pins hold a lot of benefits that you can use for a variety of applications. This kit covers the basics like using LEDs, and Buttons while providing a solid set of parts for working with any other hardware I/O and the 40-pin header. In addition, we've included all the parts needed for getting the Raspberry Pi 4 up and running whether it's on its own, or using a monitor (not included). The new 64GB MicroSD cards keep read/write commands running super fast, too.

Most of the contents of the kit rely on the use of the 2x20, 40-pin header, so we've included a special extender to allow you to plug in the ribbon cable while using the provided heatsink case. We've also included a Qwiic Shim for easily working with I²C based Qwiic boards with the Pi. No soldering is required for this kit!

Note: This variation includes the 4GB RAM option for the Raspberry Pi 4.

Includes:

• Raspberry Pi 4 Model B (4GB)
• USB C Wall Adapter - 5.1V, 3A (Black)
• USB Type C to Type C Cable - 1 Meter, 100W, USB 2.0
• Aluminum Heatsink Case for Raspberry Pi 4 - Obsidian Black
• SparkFun Qwiic SHIM for Raspberry Pi
• Micro HDMI Cable - 3ft
• Kingston Canvas Go! Plus 64GB MicroSD Card with Adapter
• 2 X 20 Pin Extended GPIO Header - 16mm/7.30mm
• Jumper Wires Premium 6" M/F --- 10 Pack
• Jumper Wires Standard 7" M/M --- 30 Pack
• SparkFun USB Mini-B Cable --- 6 Foot
• Raspberry Pi GPIO Ribbon Cable --- 40-pin, 6"
• Resistor 330 Ohm 1/6 Watt PTH --- 20 pack
• Assorted LED (20 pack)
• Multicolor Buttons (4 pack)
• Breadboard --- Full-Size (Bare)
• SparkFun FTDI Basic Breakout --- 3.3V
• SparkFun Pi Wedge

Documents:

• Product Brief
• Hookup Guide
• Raspberry Pi Org Documentation Page
• NOOBS Download
• Raspberry Pi Resource Page

Videos