The SparkFun Qwiic Nitrogen Dioxide Gas Sensor is a compact and solderless solution for measuring nitrogen dioxide (NO2) gas concentrations in indoor environments. Utilizing the Winsen GM-102B MEMS sensor, it detects NO2 levels between 0.1 and 10 parts per million (ppm), routing the sensor's anal...
The SparkFun Qwiic Nitrogen Dioxide Gas Sensor is a compact and solderless solution for measuring nitrogen dioxide (NO2) gas concentrations in indoor environments. Utilizing the Winsen GM-102B MEMS sensor, it detects NO2 levels between 0.1 and 10 parts per million (ppm), routing the sensor's analog voltage fluctuations into an onboard 10-bit analog-to-digital converter (ADC) that delivers a clean digital signal directly over I2C.
Qualitative Measurement & Calibration
While the GM-102B measures nitrogen dioxide gas concentration, it returns only qualitative data; the data does not represent a specific concentration in ppm.
Built-in ADC: The onboard 10-bit analog-to-digital converter takes the sensor's raw analog voltage output (with a sensitive material resistance of 1KΩ to 30KΩ) and feeds the converted data to your microcontroller over I2C (default address 0x50).
Sensor Calibration: Because the baseline values are uncalibrated and can experience some crossover with other gases, you'll need to calibrate the output against known concentrations of NO2 to extract useful ppm data.
Operation Efficiency: Includes an onboard LDO power regulator configured to power the internal sensor heater with an 80Ω ±20Ω room-temperature resistance that consumes less than 40mW of power.
This breakout features a pair of Qwiic connectors for a completely solderless setup and works directly with the SparkFun GM-XX2B Arduino Library. For users who prefer a traditional breadboard circuit or need direct access to the analog signal, standard 0.1-inch-spaced plated through-hole (PTH) pins break out the 3.3V power, I2C lines, ADC Alert signal, and the sensor's raw VOUT signal.v