Currency
|
ColorFabb - LW-PLA BLACK Filament - 2.85mm 750gr
£53.90
£44.92
ColorFabb Light weight PLA (LW-PLA) is the best filament for printing RC Planes, Cosplay and other light weight items. Parts are feather light, yet retain good strength and are easy to cut, trim and sand. If part weight matters to you, then this is your filament of choice.
SKU
CF-LWPLABLK2
COLORFABB LW-PLA 2.85mm 750gr
Pros
Cons
This is what customers are saying about this material:
-“…Must have material for RC planes! Light, easy to print, can cut and trim, too”
-"...LW-PLA, it’s perhaps the most ingenious 3D printer filament on the market."
-“…So far I have used this for cosplay and the weight reduction is amazing”
-“...This filament creates strong, lightweight parts with great surface finish and it sands very well (better than normal PLA)”
-“…I've been using this filament for various decorative prints to be worn, and the weight reduction is a real advantage!”
-..”Ideal for Drone replacement parts”
Specification
Material:
colorFabb LW-PLA
Diameter Tolerance:
± 0.1 mm
Density:
1.210-1.430 g·cm-3 (non activated density)
0.403 – 0,476 g·cm-3 (maximum activated density)
Glass Transition Temperature:
55C
Printing Advice
Adviced 3D printing temperature
195-260C
Adviced 3d print speed
40 - 100 mm/s
Advised Heated bed
(if you have one, not strictly necessary):
50-60C
Downloads
| Spool Size | 750g |
|---|---|
| Filament Thickness | 2.85 mm |
| Plastic Type | PLA |
| 3D Printing Technology | Filament (FDM/FFF) |
Write Your Own Review