DFRobot - HCR-MOBILE ROBOT PLATFORM

Introduction:

The HCR Mobile Robot Kit is a two wheel drive mobile robot platform which has three levels included (if you want, you can use only the parts you need, or make a two level robot). The kit includes two motors, 2 wheels (and one rotating third wheel) and all associated plates and hardware. The supports include spaces for servos and sensors and the base has holes specifically for mini-itx motherboards.

Specification:

• Aluminum power-coated orange 
• Two 7w DC motors with 122:1 Gearbox 83 rpm
• Two (2 Phases) encoders with 64 CPR 
• 2 wheels (and one rotating third wheel)
• Associated plates and hardware
• Three bumper sensors
• Five Sharp GP2D12 infrared sensors
• Romeo Controller board (Arduino compatible)
• Weight: 5.2kg
• Dimensions: 34.2cmx31.3cmx26.6cm

• DC Motor Specification:
  • Working voltage: 12V
  • No Load:10872 RPM
  • RPM after Gearbox :83RPM
  • Diameter:31mm
  • Length:55mm
  • Nominal output power:7W
  • Gearbox ratio:122:1
  • Encoders:Hall
  • Encoder Phase:AB
  • Encoder Resolution:64CPR

Project Code:

• http://code.google.com/p/hcrobot/
• Wiki Doc
• Encoder Schematic (V1 with Optical Sensor)

Shipping List:

• HCR Kit (including two motors with encoders)
• Five Sharp GP2Y0A21 Distance Sensor
• Romeo Controller board (Arduino compatible)
• A 12V 7AH Battery is required to power the kit.

Video: