Currency
|
Qwiic Humidity AHT20
£6.60
£5.50
The AHT20 humidity sensor is brand new from ASAIR; it measures temperature within a tolerance of ±0.3 °C and relative humidity with ±2% error putting it on the high end of performance, but with relatively low cost!
SKU
S-SPX-16618
The AHT20 humidity sensor is brand new from ASAIR; it measures temperature within a tolerance of ±0.3 °C and relative humidity with ±2% error putting it on the high end of performance, but with relatively low cost!
Use our Arduino library to send I2C commands over the Qwiic bus to trigger measurements and get real-time temperature and humidity data. Just search "SparkFun AHT20" in the Arduino library manager or download the zip file from our Github repo to get the library.
This board is one of our many Qwiic compatible boards! Simply plug and go. No soldering, no figuring out which is SDA or SCL, and no voltage regulation or translation required!
We do not plan to regularly produce SparkX products so get them while they’re hot!
The AHT20 humidity sensor Sensor can also be automatically detected, scanned, configured, and logged using the OpenLog Artemis datalogger system. No programming, soldering, or setup required!
Experimental Product: SparkX products are rapidly produced to bring you the most cutting edge technology as it becomes available. These products are tested but come with no guarantees. Live technical support is not available for SparkX products. Head on over to our forum for support or to ask a question.
Documents:
Write Your Own Review