JTech - X Carve Inventables Dust Boot Magnet Side Mounting Kit

The kit works with all old and new X Carve machines. It also works with machines with the new Z Axis slider upgrade. We no longer mount the laser on the top of the Z gantry and instead mount it on top of the X Controller and run the cables to the gantry.

Installation Instructions: CLICK HERE

The full kit includes the side mount and everything else in the original X Carve Mounting kit. Purchase this if you bought the magnetic laser shroud version.

1 - Laser Mount: To put in the spindle holder for the laser to connect with magnets.

2 - Laser Mount Screws/Nuts: To mount the laser on the laser mount.

3 - Laser Spindle Mount Screws/Nuts: Longer M4 Screws to be able to place the laser mount in the spindle holder.

4 - Zip Ties: To clean everything up for cabling.

5 - Zip Tie Holder: To place on the Z axis gantry to hold the laser cable in place.

6 - Molex Mini Fit Cable: Input control cable for the laser driver.

7 - Laser and Fan Extension Cables: 10 ft extension cables.

Full Mounting Kit

Super Easy to Remove When Not Using The Laser