Currency
|
LSLidar - W Series - W050C/I 2D Lidar
£643.15
£535.96
W Series LiDAR is designed for equipment collision avoidance and intelligent area detection applications. It uses mature TOF detection principles to accurately detect high-risk operating areas.
The monitoring area is flexibly set, and its anti-shock and vibration capabilities are far ahead of the industry. It brings highly reliable and stable intelligent perception for service robot, AGV, AMR, etc.
SKU
LS-W050C/I
LSLidar - W Series
Anti-collision LiDAR
W Series LiDAR is designed for equipment collision avoidance and intelligent area detection applications. It uses mature TOF detection principles to accurately detect high-risk operating areas.
The monitoring area is flexibly set, and its anti-shock and vibration capabilities are far ahead of the industry. It brings highly reliable and stable intelligent perception for service robot, AGV, AMR, etc.
Ultra-Wide Scanning
270º
Range
5/10/20/30/50m
Eye Safety
Class 1
Early Warning Protection
Three-level Advanced Warning
Output Data
Switch Volume, Data Volum
Anti-Glare
Indoor and outdoor applications
Resistant to the Shock and Vibration
W series LiDAR has passed the rigorous accelerated shock test and was certificated, the drop of height with acceleration is until 40g, much higher than the one normally requested of 10g. That is highly appreciated by some applications such as autonomous driving, AGV and forklifts, which really need to avoid being damaged during the running, loading, unloading, and transportation operations, then finally improve the safety.
| FOV | Scan Rate |
| 270º | 10Hz |
| Resolution | Interface |
| 0.18º | NPN, PNP |
| Shock | Vibration |
| 500m/sec², Lasts 11ms | 5Hz-2000Hz, 3G rms |
| Working Temperature | IP Rating |
| -20ºC ~ 60ºC | IP67 |
Write Your Own Review
