The difference between this Bulk pack and the
Stand alone MX-28 servos are the accessories: the 6pcs Bulk Pack
does not include the Horn, Cables or Screws.
This is the 6pcs Bulk Pack. This
pack is a Bulk pack offer at a discounted price.
The difference between this Bulk pack and the
Stand alone MX-28 servos are the accessories: the 6pcs Bulk Pack
does not include the Horn, Cables or Screws.
Horns and Cables for the 6pcs Bulk Packs may be purchased
separately here:
HN07-N101 Horn
(for MX-28) |
3P Cables.
The Dynamixel MX
Series servos feature a contactless (Magnetic) position encoder and PID control for superior
accuracy and reliability. The MX series offers 12bit (4096) position resolution
and can operate in the 360º range offering 0.008º resolution.
Dynamixel Servos are connected using a Daisy Chain mechanism and are queried
and controlled with an advanced Serial protocol. Over 50
Read/Write parameters are available including Position feedback, Load feedback
and PID tuning.
Advanced durability, degree of precision, and wider control zone were achieved thanks to the newly applied CONTACTLESS ABSOLUTE ENCODER
360 degrees POSITION CONTROL without dead zone
4,096 PRECISE RESOLUTION by 0.088 degrees
SPEED CONTROL at ENDLESS TURN MODE
Reliability and accuracy were advanced in the position control through PID CONTROL
High baud rate up to 4.5Mbps
12-bit resolution, 360º operation range with super-durability
Precise and reliable PID control
Maxon motor, 32-bit controller, high communication speed. The
dimensions are compatible with RX and EX series servos
Specifications:
Model
MX-28T model - TTL level
communication.
Weight
72g
Dimension
35.6mm x 50.6mm x 35.5mm
Gear Ratio
193 : 1
Operation Voltage (V)
10
12
14.8
Stall Torque (N.m)
2.3
2.5
3.1
Stall Current (A)
1.3
1.4
1.7
No Load Speed (RPM)
50
55
67
Motor
Maxon Motor
Minimum Control Angle
About 0.088º x 4,096
Operating Range
- Position Control Mode : 360º -
Wheel Mode : Endless turn
Operating Voltage
10~14.8V (Recommended voltage : 12V)
Operating Temperature
-5ºC ~ 80ºC
Command Signal
Digital Packet
Protocol
Half duplex Asynchronous Serial
Communication
(8 bit, 1 stop, No Parity)
Link (physical)
TTL level Multi Drop Bus (daisy chain type connector)
ID
254 ID (0~253)
Baud Rate
8000bps ~ 4.5Mbps
Feedback Functions
Position, Temperature, Load, Input
Voltage, etc.
Material
Case : Engineering Plastic
Gear : Full Metal
Position Sensor
Contactless absolute encoder
(Magnetic Encoder)
By default MX servos are set to ID1 and 57600bps; after purchase,
please change ID and baud rate according to your needs.
The 6pcs Bulk does not include the
Horn, Cables or Screws.
Horns and Cables for the 6pcs Bulk Packs may
be purchased here:
HN07-N101
Horn | 3P Cables ( You need 6x HN07-N101 horns and 1x Pack of 3P cables to complete
the 6pcs Bulk. )